網站首頁 ◇ 產品展示 ◇ 通用色譜柱 ◇ GC-PLOT柱 > Rt®-Alumina BOND/KCl Columns（熔融石英plot柱）

Rt®-Alumina BOND/KCl Columns（熔融石英plot柱）

更新時間： 2017-07-09

產品型號：

產品報價：

所在地：北京市朝陽區望京西園222號星源國際D座1503室

產品特點： The Rt?-Alumina BOND column is stable up to 200 °C. If water is adsorbed on the column, it can be regenerated by conditioning at 200 °C. Full efficiency and selectivity will be restored.

在線詢價聯系我們

（聯系我們，請說明是在北京明尼克分析儀器設備中心上看到的信息，謝謝！）

產品分類點擊展開+
PRODUCTS

相關文章
PRODUCTS

誠信天下，質得信任

共創共贏

產品概述

Rt^®-Alumina BOND/KCl Columns （fused silica PLOT）

（KCl deactivation）

Guaranteed Reproducibility
Each Rt^®-Alumina BOND column is tested with a hydrocarbon test mix to ensure proper phase thickness and selectivity. 1,3-Butadiene is used to calculate k （capacity factor）, which is a measure of phase thickness. Selectivity is measured using retention indices for propadiene and methyl acetylene. The resolution of trans-2-butene and 1-butene is also verified. To measure coating efficiency, plates per meter are checked using 1,3-butadiene.
With our new technology, both Na2SO4 and KCl are available with the Rt^®-Alumina BOND columns.

Similar Phase（s）:

GC-Alumina KCl, CP-Al2O3/KCl

catalog #	length	id	df	units
19761	30m	0.32mm	5μm	ea.
19762	50m	0.32mm	5μm	ea.
19759	30m	0.53mm	10μm	ea.
19760	50m	0.53mm	10μm	ea.

Showing 1 to 4 of 4 entries

1. Highly selective for C1-C5 hydrocarbons; separates all unsaturated hydrocarbon isomers above ambient temperatures. 2. Reactivity of aluminum oxide stationary phase is minimized so that column response for polar unsaturates, such as dienes, is optimized. Column sensitivity or response ensures a linear and quantitative chromatographic analysis for these compounds. 3. Strong bonding prevents particle generation. The column can be used in valve switching operations, without release of particles that can harm the injection and detection systems. 4. The Rt^®-Alumina BOND column is stable up to 200 °C. If water is adsorbed on the column, it can be regenerated by conditioning at 200 °C. Full efficiency and selectivity will be restored. 5. High capacity and loadability give exceptionally symmetric peaks; ideal for volatile hydrocarbon separations at percent levels, as well as impurity analyses at ppm concentrations.

Guaranteed Reproducibility Each Rt^®-Alumina BOND column is tested with a hydrocarbon test mix to ensure proper phase thickness and selectivity. 1,3-Butadiene is used to calculate k （capacity factor）, which is a measure of phase thickness. Selectivity is measured using retention indices for propadiene and methyl acetylene. The resolution of trans-2-butene and 1-butene is also verified. To measure coating efficiency, plates per meter are checked using 1,3-butadiene. Extensive testing assures reproducible retention times and predictable flow behavior column-to-column.

Acetylene elutes before C4 hydrocarbons （impurities in butane/isobutane）.